NZXT | Gaming PCs, Prebuilt Desktops, PC Components

H5 Flow + Kraken Elite 240

H5 Flow + Kraken Elite 240 - Main image
$241.38 $354.97 In stock

Category: 번들

H5 Flow

H5 Flow는 타공된 PSU 슈라우드, 메시 패널, 대형 라디에이터 지원으로 공기 흐름과 GPU 쿨링을 강화합니다. 이 모든 것이 컴팩트한 미드타워 폼 팩터에 담겨 있습니다.

  • PSU 슈라우드는 측면과 하단이 타공되어 있어 120mm 팬 2개(미포함)로부터 최적의 공기 흡입이 가능합니다.
  • 전면에 최대 360mm 라디에이터, 상단에 240mm 라디에이터를 지원하여 강력한 수랭 쿨링 잠재력을 제공합니다.
  • 상단, 전면, 측면 패널의 초미세 메시가 최대 공기 흐름을 만들고 먼지를 필터링합니다.
  • 120mm Quiet Airflow 팬(CV) 2개가 기본 제공됩니다. 전면에 1개, 후면에 1개가 장착되어 개봉 즉시 탄탄한 성능을 발휘합니다.
  • 넓은 채널, 후크, 스트랩으로 케이블을 손쉽게 정리하고 숨길 수 있습니다.

Kraken Elite 240

더욱 강력해져 돌아온 Kraken Elite는 맞춤 설계된 NZXT Turbine 펌프를 탑재하여 CPU 쿨링 성능을 놀라운 10%* 향상시킵니다. 다이내믹 RGB 링이 있는 멋진 2.72인치 IPS 스크린은 무한한 개인화 옵션을 제공하여 어떤 빌드에서도 시선을 사로잡는 포인트가 됩니다.

*Kraken Elite 240 RGB(2024)와 Kraken Elite 240 RGB(2023)의 열 저항 테스트를 Intel Open Bench 방식으로 비교한 결과입니다.

  • 맞춤 설계된 NZXT Turbine 펌프는 높은 유량과 헤드 압력을 제공하여 강력하면서도 조용한 CPU 쿨링을 실현합니다.
  • 2.72인치 IPS LCD에서 선명한 640x640 해상도, 부드러운 60Hz 주사율, 넓은 시야각으로 생생한 비주얼을 즐기세요.
  • 좋아하는 GIF나 이미지를 표시하고, 실시간 시스템 성능을 추적하며, Spotify, YouTube 등과 연동할 수 있습니다.
  • 다이내믹 라이팅 효과로 RGB 링을 커스터마이즈하거나 화면 콘텐츠 및 다른 RGB 기기와 동기화하세요.
  • 높은 정압 팬이 강력한 공기 흐름을 제공하며, 저부하 시 Zero RPM 모드로 정숙성을 유지합니다.
  • 사전 도포된 서멀 페이스트, 단일 브레이크아웃 케이블, 최신 Intel® 및 AMD® CPU 소켓용 툴프리 장착 브래킷으로 간편하게 설치하세요.
  • 브레이드 슬리빙이 적용된 확장 고무 튜빙으로 안심하고 다룰 수 있으며 장기간 누수 보호를 제공합니다.

Customer Reviews (4.3 / 5 · 3 reviews)

Samuel ★★★★★

Building in this case was surprisingly easy for a compact mid-tower, and the perforated PSU shroud actually makes a difference for airflow down low. The mesh front panel keeps things quiet even when the fans ramp up. My only note is cable management in the back is a bit tight.

Claire ★★★★★

My GPU temps dropped about 8 degrees after moving my build into this case, and the mesh front really does move a lot of air. The 240mm radiator mounted up top without any clearance issues in such a compact tower. Cable routing behind the perforated shroud took some patience but it looks clean now.

Ryan ★★★☆☆

The perforated PSU shroud does help pull some heat off the GPU, and the mesh front keeps things breathable in a tight build. But the radiator mounting was tighter than I expected, and cable room behind the panel is pretty cramped. Solid airflow, just fiddly to assemble.